Validation of primary formaldehyde gas standards prepared by dynamic thermogravimetry through a tri-national comparison of gaseous formaldehyde amount fraction

A validation study for primary formaldehyde gas standards was performed at three National Metrology Institutes: the Korea Research Institute of Standards and Science (KRISS), the National Metrology Institute of Japan (NMIJ) and the National Institute of Metrology of China (NIM). The studied materials had a nominal amount fraction of 2 μmol/mol formaldehyde in nitrogen balance and were prepared in 10-L aluminum cylinders by KRISS. The impurities in the materials were analyzed using a gas chromatograph/atomic emission detector and a Fourier-transform infrared spectrometer (FTIR). The stability of the materials was assessed for 1 year by KRISS using paraformaldehyde as a source for the primary standard gas and a cavity ring-down spectrometer (CRDS) instrument as the measurement method. The amount fraction of formaldehyde in the materials decreased linearly by 0.74 % each month. The studied materials that exhibited similar linear rates of decline were distributed to the participants. After the measurement was completed by the participants, the materials were returned to KRISS and the stability analysis based on the primary standard maintained at KRISS was repeated. NMIJ analyzed the materials using paraformaldehyde as the source of the primary standard of formaldehyde and FTIR analysis, whereas NIM used trioxane as the primary standard gas source and CRDS analysis. The results of the comparison revealed good agreement between the results and were within the expanded uncertainty of 2 % although each of them used different combinations of methods in the generation of primary gas standards and measurements.     

Extraordinary transport behavior of gases in isothermally annealed poly(4‐methyl‐1‐pentene) membranes

Poly(4‐methyl‐1‐pentene) (PMP) membranes were modified through isothermal annealing to investigate the change of their crystalline structure and rigid and mobile amorphous fractions (RAF and MAF), assuming a three‐phase model, affected the gas transport behavior. The crystalline structure was characterized by wide‐angle X‐ray diffraction (WAXD) and small‐angle X‐ray scattering (SAXS) techniques, and the free volume properties were analyzed by positron annihilation lifetime spectroscopy. Compared with the pristine membrane, the annealed membranes show higher crystallinity; the crystals undergo partial structural change from form III to form I. The lamellar crystal thickness, rigid amorphous fraction thickness, and long period in the lamellar stacks increase with crystallinity. The annealed PMP membranes exhibit higher permeability due to the increase in larger size free volumes in MAF and higher selectivity due to the increase in smaller size free volumes in RAF, respectively. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2368–2376     

How Does Solvation Affect the Binding of Hydrophilic Amino Saccharides to Cucurbit[7]uril with Exceptional Anomeric Selectivity?

Cucurbit[7]uril (CB[7]) is known to bind strongly to hydrophilic amino saccharide guests with exceptional α‐anomer selectivities under aqueous conditions. Single‐crystal X‐ray crystallography and computational methods were used to elucidate the reason behind this interesting phenomenon. The crystal structures of protonated galactosamine (GalN) and glucosamine (GluN) complexes confirm the inclusion of α anomers inside CB[7] and disclose the details of the host–guest binding. Whereas computed gas‐phase structures agree with these crystal structures, gas‐phase binding free energies show preferences for the β‐anomer complexes over their α counterparts, in striking contrast to the experimental results under aqueous conditions. However, when the solvation effect is considered, the binding structures drastically change and the preference for the α anomers is recovered. The α anomers also tend to bind more tightly and leave less space in the CB[7] cavity toward inclusion of only one water molecule, whereas loosely bound β anomers leave more space toward accommodating two water molecules, with markedly different hydrogen‐bonding natures. Surprisingly, entropy seems to contribute significantly to both anomeric discrimination and binding. This suggests that of all the driving factors for the strong complexation of the hydrophilic amino saccharide guests, water mediation plays a crucial role in the anomer discrimination.     

Crystal structure of an antiviral ankyrin targeting the HIV-1 capsid and molecular modeling of the ankyrin-capsid complex

Ankyrins are cellular repeat proteins, which can be genetically modified to randomize amino-acid residues located at defined positions in each repeat unit, and thus create a potential binding surface adaptable to macromolecular ligands. From a phage-display library of artificial ankyrins, we have isolated Ank^GAG1D4, a trimodular ankyrin which binds to the HIV-1 capsid protein N-terminal domain (NTD^CA) and has an antiviral effect at the late steps of the virus life cycle. In this study, the determinants of the Ank^GAG1D4-NTD^CA interaction were analyzed using peptide scanning in competition ELISA, capsid mutagenesis, ankyrin crystallography and molecular modeling. We determined the Ank^GAG1D4 structure at 2.2 Å resolution, and used the crystal structure in molecular docking with a homology model of HIV-1 capsid. Our results indicated that NTD^CA alpha-helices H1 and H7 could mediate the formation of the capsid-Ank^GAG1D4 binary complex, but the interaction involving H7 was predicted to be more stable than with H1. Arginine-18 (R18) in H1, and R132 and R143 in H7 were found to be the key players of the Ank^GAG1D4-NTD^CA interaction. This was confirmed by R-to-A mutagenesis of NTD^CA, and by sequence analysis of trimodular ankyrins negative for capsid binding. In Ank^GAG1D4, major interactors common to H1 and H7 were found to be S45, Y56, R89, K122 and K123. Collectively, our ankyrin-capsid binding analysis implied a significant degree of flexibility within the NTD^CA domain of the HIV-1 capsid protein, and provided some clues for the design of new antivirals targeting the capsid protein and viral assembly.     

On Convergence of Flat Multivariate Interpolation by Translation Kernels with Finite Smoothness

In this paper, we provide an alternate approach to the analysis of the limit of flat radial basis interpolation, thereby improving and expanding on the current understanding of this interesting problem.     

Synthesis and Properties of Thermosensitive Poly(N-Isopropylacrylamide)/Waterborne Polyurethane Graded Concentration Hybrid Films

Temperature-sensitive hybrid films were synthesized with a concentration gradient by casting and UV curing of N-isopropylacrylamide (NIPAAm) monomers (0%–70%) on the free surface of waterborne polyurethane (WPU) films on a Teflon substrate. The surface hardness and contact angle of the free surface with a water drop increased asymptotically with the addition of NIPAAm, whereas those on the substrate side were virtually unchanged. The diffusion coefficient (D), rates of swelling at 20°C (below the lower critical solution temperature (LCST) of poly(N-isopropylacrylamide) (PNIPAM)) and deswelling at 50°C (above the LCST) increased with increasing NIPAM content, showing favorable thermosensitivity. In addition, the glassy state modulus and glass transition temperature (Tg) of the film increased with increasing NIPAM content, whereas the rubbery modulus decreased due to the increased molecular weight between the crosslinks. In addition, as the NIPAM content increased, the film showed a positive yield with an increased yield and fracture stress and decreased ductility. Above 50% NIPAM, the film became brittle, showing a linear stress–strain relationship.     

Thermal decompositions of dialkyl peroxides studied by DSC

Studies on the thermal decompositions of diamyl peroxide (DAPO), dicumyl peroxide (DCPO), and tert-butyl cumyl peroxide (TBCP) were conducted by DSC. Heat of decomposition, exothermic onset point, and chemical kinetics were determined and compared to those data of di-tert-butyl peroxide (DTBP), a model compound for studying thermokinetics of organic peroxide and standardization of a calorimeter. Similarities and differences of decomposition mechanisms between these organic peroxides were proposed and verified. Kinetics on decomposition of uni-molecular reaction via these similar alkoxyl radials accompanying β C–C bond scission were discussed and compared to the results from ab initio calculations. The ranking of thermal stability on dialkyl peroxides is determined to be in the following sequence: DCPO < TBCP < DAPO < DTBP. This rate-determining step in thermal decomposition of dialkyl peroxides possessed an average eigenvalue of log A at about 13.1 ± 1.2. Activation energy on the thermal decomposition of these peroxides was calculated to be 139.5 ± 14.4 kJ mol^?1.